Commander Echo Instrument Potential Problems
Problem |
Probable Cause |
Possible Solution |
Instrument does not appear to respond to the charger. The LED does not light. |
Bad Connection or Inoperable Battery |
Check the USB daisy chain connection to the charger and the instrument. If the daisy chain connections appear to be good, remove all other devices and try connection the instrument to a different USB connection on the USB dais chain. If the LED does not light up after 60 minutes, contact JTECH Customer Service for repair options. |
The enter button will no longer click when pressed. |
Possible damaged switch |
Please contact JTECH Support for repair options |
Instrument LED blinks rapid RED and then stos after a few seconds on any attempt to turn the instrument on. |
Dead battery Indicator |
Charge the instrument for one complete cycle (up to 6 hours) and attempt to use it again. |