Home
Tracker Version 5
Tracker Version 5 Software is the heart of the Tracker Functional Testing and Documentation System. With our most intuitive interface ever, Tracker Version 5 Software simplifies patient file management, provides comprehensive Intake and Physical/Neurological documentation, seamlessly integrates all Tracker 5 modules (like Objective Inclinometry for Range of Motion, Hand Evaluation, FCE and Impairments), and streamlines report writing.
Very helpful 
Could be better 
Not helpful A full calibration is recommended for all JTECH force gauges on a yearly basis with certified weights. For more information, contact JTECH Customer Service.
1. Select Full Calibration from the system drop-down menu, and then select the instrument that is to be calibrated.
2. Wake up a wireless instrument by gently pressing the “On” button. For Legacy instrument calibration, make sure the Tracker Box is turned on.
Note: The value displayed in the upper right-hand corner of the Calibration screen is the raw value that will be captured when the calibration is performed. A Ø symbol indicates that communication with the instrument has not been established.
3. Make sure there is no weight or force applied to the instrument and click the "Zero" button to zero calibrate the device.
4. Enter the amount of weight for the calibration into the Weight field and select the “Units” (pounds, metric or newtons) from
the drop-down list. Normal ranges for weight calibrating the device are displayed in the screen’s right-hand column.
5. Apply the weight to the instrument and click the "Calibrate" button.
4. Compare the current calibration data with the previous calibration data and the factory calibration data. If the data varies more than 5%, contact JTECH Customer Service.
Add a Comment